Nexxo S.A. is an industrial services company specialising in oil & gas, mining and electrical power generation. Nexxo act as the agent of Cokebusters throughout South America.
VISIT SITETube Tech International provides robotic cleaning of the external surface of fired heater/furnace convection banks. They provide services to clean heat exchangers, ACCs, VCFEs and furnaces.
VISIT SITECR Asia is a specialised maintenance contractor to the Oil, Gas, Refining, Chemical, Power and other asset-intensive industries.
VISIT SITEWith over 30 years of experience in the Brazilian pipeline market, 4Pipe-Hidropig serves the most diverse demands of the industry, from cleaning ducts and pipes to the inspection of pipelines with Instrumented Pigs.
VISIT SITESteady Flux is a custom engineering services company whose Header Delivery System (HDS) allows access to previously inaccessible tubes within fired heaters.
VISIT SITETWI is a membership-based organisation, supporting both individuals and companies alike. They provide authoritative and impartial expert advice, knowhow and safety assurance through engineering, materials and joining technologies.
VISIT SITENo. With the exception of delays which fall outside of our control, e.g. the non-availability of on-site support, delays during the decoking or inspection operations will not incur additional costs to the client.
Lodged pigs are quite rare and can generally be resolved by reversing the flow.
During the decoking and inspection process, the progress of the pig is continually monitored using Cokebusters “InnerVision” monitoring software (a pressure/flow based system). As a pig traverses a bend, an increase in differential pressure will be observed across the pig - this is seen as a sharp pressure spike on the InnerVision display.
Using a combination of pressure and flow readings and travel times, referenced against furnace geometry information (drawings), the location of the pig is known at all times by the decoking operator.
The Cokebusters pumping units contain an integral effluent tank, which contains a two-stage filtration system. These filters will catch any suspended solids with a particle size greater than 750µm. Upon completion of the decoking process, the effluent tank will be emptied using a vacuum truck.
All types of furnace tube materials can be inspected, including CrMo, carbon steel, stainless steel, cast, incoloy etc.
Yes, we are able to inspect any process piping between 2.5” and 12” internal diameter, where a launcher/receiver can be fitted to the inlet/outlet.
Other common applications include OTSG/HRSG boilers, transfer lines and pipelines.
As strict company policy, we always carry out a minimum of two separate inspections with different smartpigs. The second run is used to validate the data obtained from the first run. Additional inspections runs can be carried out as required by the client. No additional charges will be made for multiple inspections.
No, although if the pipe has been cleaned by other methods, e.g. jetting, a “sweep” clean will still be required to verify that any internal fouling/residue is removed and the passes are clear prior to inspection. A suitable pumping unit and launcher/receivers will be required to drive the inspection tool. Cokebusters are able to carry out inspections worldwide, using either our own pumping units, or in conjunction with a pumping unit provided by a third party.
Cokebusters are aware of the negative impacts that the daily running of the business can have on the environment. Our aim is to prevent and minimise this impact, whilst continuously creating positive improvements to ensure a positive effect on our local environment and globally.
DOWNLOAD POLICY